RPMS1381-H19 series photo link module 1/2 ultra-compact surface mount remote control photoreceiver module RPMS1381-H19 z outline z dimen sions (unit : mm) rohm?s RPMS1381-H19 photoreceiver, utilizing original miniaturization technology, features the smallest ? mounting area in the world. in addition, the s/n ratio in broad daylight is significantly improved due to rohm?s unique optical technology. z a pplications a ll types of portable devices, including digital still and video cameras, car navigation equipment, laptops, and gaming consoles z features 1 ) smallest mounting area in the world (9mm 2 ) 2) resistant to sunlight noise 3) low power consumption: 300 a (i n standby mode) z a bsolute maximum ratings (t a = 25 c) parameter supply voltage output current storage temperature operating temperature symbol vcc io tstg topr limits 6.3 2.0 ?40 to +100 ?40 to +85 unit v ma c c conditions no condensation 1.2 2.45 1.15 2.85 1.82 1.54 1.04 2.04 3.02 4.33 2.49 mounting center ? jan.07 rohm study
RPMS1381-H19 series photo link module 2/2 z electrical, optical characteristics (ta = 25 c) recommended operating conditions characteristics parameter supply voltage parameter consumption current effective distance high level output voltage low level output voltage on pulse width off pulse width center frequency horizontal half angle vertical half angle symbol vcc symbol lcc l v h v l t on t off fo 1/2 1/2 unit a m v v s s khz deg deg conditions no outside light, no signal input ?1 outer light condition ee 10 (ix) ?1 ?1 i sink 200a ?1 outer light condition ee 10 (ix) ?1 outer light condition ee 10 (ix) ?2 ?2 ?1 600/600 s burst wave is transmitted by standard transmitter. however, it must be measured after the initial transmission pulse is 10 pulse. ? 2 it is an angle when the linear arrival distance become half. ty p. 300 8 ? ? 600 600 37.9 34 32 min. ? 5 2.5 ? 400 400 ? ? ? max. 500 ? ? 0.5 800 800 ? ? ? min. 2.7 ty p. 3.0 max. 3.6 unit v
notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. appendix1-rev2.0 thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact your nearest sales office. rohm customer support system the americas / europe / asia / japan contact us : webmaster@ rohm.co. jp www.rohm.com copyright ? 2007 rohm co.,ltd. the products listed in this document are designed to be used with ordinary electronic equipment or de vices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. it is our top priority to supply products with the utmost quality and reliability. however, there is always a chance of failure due to unexpected factors. therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. rohm cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the notes specified in this catalog. 21, saiin mizosaki- cho, ukyo-ku, kyoto 615-8585, japan tel : +81-75-311-2121 fax : +81-75-315-0172 appendix
|
